pulse oximeter reader
finger oxygen monitor
oxygen reader for finger
oxygen level checker
best rated oximeter
machine to check oxygen level
SPECIAL OFFER

Finger Oxygen Monitor | Oxygen Level Finger Tester | Pulse Oximeter Reader

$22.98
Special offer Discount Code:DISCOUNT30%

 

Ship From US

🆕😊

Often imitated, never duplicated. The Pulse Oximeter from Homecarewholesale is one of the most popular fingertip pulse oximeters globally, and for a good reason.

The Pulse Oximeter is a portable health-pack that can come in handy when you have hyperventilating chances. That is more likely to happen if you're a Pilot or an athlete or in high altitude situations where you need to monitor frequent oxygen saturation. This device comes in a compact design and a simple touch to turn on the button, and it can be carried easily everywhere because of the soft carrying case. 

Principle of measurement:

The Oximeter principle is as follows: An experience formula of data process is established using Lambert-Beer Law according to Spectrum Absorption Characteristics of Reductive Hemoglobin (Hb) and Oxyhemoglobin (HbO2) in glow & near-infrared zones. The instrument's operation principle is: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology so that two beams of different wavelength of lights can be focused onto human nail tip through perspective clamp finger-type sensor. Then measured signal can be obtained by a photosensitive element, information acquired through which will be shown on screen through treatment in electronic circuits and microprocessors.

best o2 finger sensor

Caution:

  1. The finger should be placed properly; else, the provided results could be inaccurate.
  2. The photoelectric receiving tube and the SpO2 sensor must be arranged in accordance with the subject's arteriole position.
  3. The SpO2 sensor shouldn't be applied at a location or limb linked with arterial canal or blood pressure cuff or receiving an intravenous injection.
  4. Keep the optical path free from any optical like rubberized fabric.
  5. Refrain excessive ambient lighting such as an infrared heater, direct sunlight, fluorescent lamp, dual ruby light, etc., for protecting it from affecting the measuring results. 
  6. Strenuous action of the subject or extreme electrosurgical interference can affect the accuracy.
  7. Testee cannot use enamel or other makeup. 

 Operating Guide:

  1. Batteries must be inserted in the proper direction and then replaced by the cover.
  2. The clip must be open as visualized below. The finger must be placed in a proper position.
  3. The patient's finger must be placed aligned with the clip's rubber cushions in the right position and then clip the finger.
  4. The switch on the front panel should be pressed.
  5. During the process, the patient should be kept stationary and avoid the finger from shaking.
  6. Information is presented directly on the screen display.
    finger device to measure oxygen

    Repairing and Maintenance:

    1. If there is a low-voltage warning, change the batteries.
    2. Use alcohol swaps to clean the device always before using and then let it fry or clean it until dry with a clean fabric.
    3. Medical alcohol should be applied for disinfecting the product and preventing it from being infected the next time.
    4. Take out the batteries if you're not going to use the oximeter for a long time.
    5. Ideal temperatures are 40ºC to 60ºC, and the humidity should be kept below 95%.
    6. The device needs to be calibrated once a year (or according to the hospital's calibrating program). It also can be performed at the state-appointed agent or contact us for calibration.
      finger oxygen checker

       

      Specification:

       Dimension: 60mm×35mm×32mm

       Weight: 50g

       SPO2 Range: 0% - 99%.

       SPO2 Resolution: +- 1%.

       Pulse Rate Range: 30-250 bpm.

       Pulse Rate Resolution: +- 1bpm.

       Power Requirements: 2 ×1.5V AAA alkaline battery or rechargeable battery instead, adaptable range: 2.6V~3.6V.

       Measurement Performance: Oxyhemoglobin/Pulse value is accurate when the pulse-filling rate is 0.4%.

       The deviation is smaller than +- 1 % when measured in natural indoor lighting conditions.

       One size fits all

      Package Contents:

       1*Pulse Oximeter

       1*One hanging rope

       1*User Manual

       1*Storage bag

      For all home care products (not including accessories) you purchase from Homecarewholesale.com, get a worry-free 1-year warranty and friendly 24 hours customer service. Enjoy your shopping freely at Homecarewholesale!

      RELATED PRODUCTS

      Customer Reviews

      Based on 18 reviews
      78%
      (14)
      11%
      (2)
      11%
      (2)
      0%
      (0)
      0%
      (0)
      P
      Paul Burnett

      Finger Oxygen Monitor | Oxygen Level Finger Tester | Pulse Oximeter Reader

      R
      Roma Brahmacharie

      I have not received the above item up to this point

      B
      Brian Feltham
      Totally satisfied!

      Great product and price, easy to use and accurate! Very pleased

      p
      patricia
      Excelente

      Tengo años con el mio, solo le cambiado la bateria y sigue funcionando perfectamente, es muy resistente y preciso

      M
      Michael
      Affordable and easy to use

      I bought this when I was having a bit of trouble with my asthma, and wanted to make sure I wasn't getting hypoxic.This is easy to use and gives me peace of mind. Knowing my blood oxygen is holding strong at 98 or 99% is comforting, even if I'm wheezing. I don't use this as much now, but I'm glad I have it for whenever I may need to monitor again.

      BACK TO TOP